TRUNK'S TIME MACHINE HQS DIORAMAX
BY TSUME
ASSEMBLY INSTRUCTIONS
ASSEMBLY INSTRUCTIONS
PLEASE DO NOT ASSEMBLE YOUR COLLECTIBLE STATUE IMMEDIATELY AFTER RECEIVING IT
PREFERABLY WEAR LATEX GLOVES TO HANDLE YOUR STATUE.
You must be at least two people to assemble this statue.
BOX 1
DOWN
(under the rock)
Up
ZOOM POLYFOAM
BOX 2
Please wait at least 48 hours after receiving your statue to proceed with its assembly.
1. Place the black base (1).
2. Place the base with the rocks (2). You need to be 2 peopleto place it.
Please note: this step must be carried out by at least 2 people so that both fittings are done at the same time.
3. Insert the metal rods into the slots provided. These metal rods must go through the base and fit into the black base (1).
Pleas note: Check that the rods are stable to avoid any tipping when activating the turntable.
4. Insert the grass (4) into the slots provided on the base. You will have one grass left. Keep it for step 7.
5. Insert the ship (7) into the base in the slots provided.
Please note: this step must be carried out by at least 2 people so that both fittings are done at the same time.
6. Insert the character on the base in the slots provided.
7. Insert the last grass (4) on the base into the slot provided next to Trunks' foot.
8. Insert Cell's cocoon on the base into the slot
9. On the front of the black base (1) below the logo location you will find a button to activate the base rotation.
10. Insert the logo (8) on the black base (1).
11. Connect the plug (10) to the back of the black base (1).